equipment For Installing Roof Shingles
If you're installing roof shingles, give particular notice to the tool you select. Here are some perfect choices based on 22 years of roofing experience...
Equipment for Installing Roof Shingles --Your Nailgun
Fasteners Staples Tool Heavy Duty
There are thirty-some roofing nailers on the market, but here are seven reasons why many professionals like myself select the Hitachi Nv45Ab2.
Check Price on - Fasteners Staples Tool Heavy Duty Products
1. It's quick and easy to load fasteners. One of the main improvements on this nail gun over previous models is the side-loading feature. You no longer have to put up with the awkward bottom-loading mechanism to enjoy the execution of a Hitachi.
2. It is fast and reliable. Firing three nails per second, the piston has pneumatic feed and return. That allows it to drive straight through tar build-ups on the feed mechanism, unlike some of the competition which rely on a spring return. That gives you a faster nailing cycle and less jamming.
3. The Hitachi has a long-lasting design. From the carbide tips on the nose of the tool, to the tough metal body and steel body shields, this gun has "body armor" to minimize wear from hard use and shingle abrasion. It also has rubber pads on the body shields to minimize slippage on steep roofs.
4. It has service available. As good as it is, nothing lasts forever. But Hitachi has a trustworthy service network to get you back up and running fast.
5. It's infinitely adjustable. Unlike some other nail guns, which have a stepped exposure gauge, the Hitachi gauge can be set to any exposure. You can use it for installing roof shingles that perfectly match the exposure of shingles driven with other nail guns, regardless of the brand.
6. It's easy on You. At just 5.5 pounds the Hitachi is one of the lightest roofing nail guns on the market. This model also has a durable rubber grip handle. These two features make a tough job a diminutive easier.
7. It's easy on your wallet. There was a time when the Hitachi was one of the most expensive roofing nail guns. Over the years, increased competition has driven the price down, while build improvements have improved the durableness of the gun. The supervene is a long-lasting tool which is a great value.
Equipment for Installing Roof Shingles -- Your Compressor
I've used a lot of distinct compressors over the years, but my popular is a Porter-Cable Model C2002-Wk. Here's why...
First off, it's electric so you don't have to listen to a loud gas motor running all day. The homeowners and neighbors will appreciate that as well. And unlike gas compressors, this type doesn't run constantly. It turns on while you are installing roof shingles, then shuts off until the pressure switch turns it back on again.
You also don't have to screw colse to with gas motors that won't start because of a bad spark plug, flooded carb or whatever. And you don't have to buy gas or worry about running out.
Electric compressors are also a lot lighter than the gas-powered ones. This one weighs just 34 pounds, which is light enough for even an old guy like me to drag up on the roof. Try that with a gas compressor.
It is also oil-less which is the only kind to have if you ever have to set it on a sloped roof. And you never have an oily mess on your shingles or the homeowners' driveway.
This Porter-Cable Model puts out all the pressure you need for a roofing nailer and has a six gallon air tank, so it is not running constantly.
Most of all, I'm happy with the price. It's not only the best compressor I've ever had, it's the cheapest.
Just be aware of its limitations. It puts out 3.5 cubic feet of air per minute, which is fine for one roofing nailer, but not positively enough for two. Also, like all "pancake type" compressors, it's a diminutive top heavy. Make sure it is obtain in your truck, or it will go tumbling when you hit the brakes.
Equipment for Installing Roof Shingles -- Your Cords and Hoses
Ideally, you want your compressor plugged directly into an electrical outlet. Extension cords cut the power available to the motor, which can supervene in premature failure. That setup works just fine for many jobs, especially if you have an outlet on both sides of the house you can use.
But sometimes you need an Extension cord. I've found that 100 feet of cord will position the compressor for installing roof shingles just about everywhere I want it. That's also long enough to power my saws and drills on the roof. But get two heavy duty 50-footers so you keep the length to the outlet as short as possible and minimize the power drop.
As far as your air hose, it's best to have a one-piece hundred footer, so there are no connections to hang up on stuff as you drag the hose over the roof. It's not just the irritation factor either. I've nailed my fingers twice over the years when my hose got hung up on something, redirecting the nailgun at my hand.
1/4" hose works fine for one nailgun and is easier to handle than a 3/8".
Be sure to have a spare hose and/or a fix kit to fix hoses and fittings that suddenly start hissing air. The compressor above comes with a 25-foot hose, which is generally too short for roofing, but it could be helpful as a backup to get you straight through the day.
With a hundred feet of Extension cord and a hundred feet of air hose, you can shingle just about anything!
equipment For Installing Roof Shingles
==================== Products By Amazon ====================
Miter Saw Blades Tool Accessories,Saw Blades,Power Tools Products,Miter Saw Accessories and Table
